Wood tops

18mm veneered MDF board. Matt transparent semi-open pore varnished 0.6mm wood veneer, 0.5mm radius corners, 1mm thick wood veneer edging. Front and back of top are 90° folded to form 50mm high side edges whose grain, being part of the same board, lines up perfectly with the top.

Leather tops

18mm melamine faced particle board with 0.5mm radius corners and 0.4mm melamine edging. Front of top is 90° folded to form a 50mm high side edge. Top and edge outer surface covered with 1.3mm abrasion resistant leather embellished with matching stitching.


Slightly angled legs with leg bottom shorter than top. Inner frame made of wood honeycomb covered with veneered MDF curved boards. Matt transparent semi-open pore varnished 0.6mm wood veneer. Both legs come with an upper cutout to accomodate epoxy powder coated steel trays along with brushed polished extruded aluminium soft-close !aps complete with brush strips for easy access to cables and ports. Cable trays are provided with a cutout to route cables down to !oor level via a vertical channel inside the legs. Each leg comes with two 0-15mm steel manually adjustable levelling feet with round Abs molded scratch-resistant base.

Underdesk metal beams

Two 60x30mm 1.5mm thick steel hollow rectangular tubes with silver-ÿnish epoxy powder coating. Beams are secured to the legs using metric-threaded screws.

Static pedestal

3-drawer + 1-pen drawer static pedestal made of 18mm veneered particle board. Matt transparent semi-open pore varnished 0.6mm wood veneer, 1mm thick wood veneer edges, 0.5 mm radius corners. Silver ÿnished epoxy powder coated metal drawers, central locking with two folding keys, full extension metal slides with safety stop mechanism, soft close for silent low impact drawer closing, anti-tilt.Stylish epoxy powder coated or chrome plated metal handles. The return top is supported on the pedestal via a cylindrical ø100mm 2mm thick steel spacer provided with lower and upper metal plates. Brushed chrome ÿnish. Four adjustable levelling feet.